Used Mazak Lathe Machines
All The Used Mazak CNC and Manual Machine Tools You Need - All Of The Time
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site

All Available CNC Lathes - By Manufacturer

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Manufacturer then Model)
Click On The Machine ID Number Below To View Machine Quote
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotos
DaewooLynx-210 A200416097LATHES, CNC, 2-AXIS, CHUCKERFanuc iGoodYes Yes
DaewooPuma-1500 SY200516444LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes23.6"" Swing, 12.9" Turn Dia., 33.8" Centers, 6,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck on Main and Sub-Spindle, Chip Conveyor, Tool Presetter, Part Catcher, Parts Conveyor, MoreYes
DaewooPuma-200 LB199916356LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21TGoodYes20.1" Swing, 13.7' OCS, 13.8 Max, Turn Dia., 11.8" Max Turn Length, 4,500 RPM, 20 HP, 12 Sta. Turret, Parts Catcher, Tool Presetter, Programmable Tailstock Body & Quill, Chip ConveyorYes
DaewooPuma-2000 SY200216692LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYesSwing 23.62", Swing Over C.S. 21.6", Maximum Turning Diameter 12.99", Length 20.08", 5,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Bar Feed, More.Yes
DaewooPuma-230 C200116687LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21TGoodYes21" Swing, 13' OCS, 13.8 Max, Turn Dia., 21.1" Max Turn Length, 3,500 RPM, 25 HP, 10 Sta. Turret, Programmable Tailstock, Parts Catcher, Auto Tool Presetter, Under 8,500 Hours Cutting Mostly PlasticYes
DaewooPuma-240 B200416319LATHES, CNC, 2-AXIS, UNIVERSALFanuc i SeriesGoodYes Yes
DaewooPuma-240 B200516320LATHES, CNC, 2-AXIS, UNIVERSALFanuc i SeriesGoodYes Yes
DaewooPuma-240 MA200416101LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTAGoodYes21.65" Swing, 15.4" SOC, 11.4" Turn Dia., 32.3" Turn Length, 6,000 RPM, 1.81" Bar Cap., 15 HP, 6.5" 3- Jaw Chuck, Live Milling, More…Yes
DaewooPuma-8HC199515543LATHES, CNC, 2-AXIS, UNIVERSALFanuc OT    
DaewooPuma-TT-1800 SY200616762LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes
DMG MoriNLX-2000 SY201616603LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYes36.37" Swing, 29.72" SOC, 14.01" Turning Dia., 19.6" Turning Length, 5,000 RPM, 2.5" Bar Cap., 30 HP, Chip Conveyor, Bar Feed Interface, Twenty (20) Station Turret Option, More..Yes
DMG MoriNLX-2500 SY - 1250201716768LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEDMG Mori CelosLike NewYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 49.4", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Scales on X, Y and Z, Steady Rest, More.Yes
DMG MoriNLX-2500 SY - 700201516701LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMitsubishi M730UMExcellentYes Yes
DMG MoriNLX-2500 SY - 700201116585LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, Bar, More.Yes
DMG MoriNT-1000 Ge2 SZM201516787LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-711 VVery GoodYes14.5" Swing, 14.5" Turn Dia., 21" Centers, 6,000 RPM, 15 HP, 1-40 ATC + 1 - 10 Sta. Turrets, 8" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More.Yes
DMG MoriNZX-1500 SY - 800201616666LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosLike NewYes Yes
DoosanLynx-220 LYC201416696LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYesSwing 20.08", Swing Over C.S. 11.42", Maximum Turning Diameter 12.59", Length 20.7", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Bar Feed, More.Yes
DoosanLynx-220 LYC201716574LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc i SeriesExcellentYes23.6" Swing, 11.8" Turn Dia., 20.1" Turn Length, 4,500 RPM, 20 HP, 12 Stations, 8" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, More.Yes
DoosanMX-2000 ST200616612LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes29.5" Swing, 23.6" SOC, 21.65" Turning Dia., 40" Turning Length, 5,000 RPM, 2.625" Bar Cap., 25 HP, Chip Conveyor, 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, High Pressure Coolant, MoreYes
DoosanPuma V-550200216227LATHES, CNC, 2-AXIS, CHUCKERFanuc 18iTBGoodYes Yes
DoosanPuma-2000 SY200716580LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 31iVery GoodYes23.622" Swing, 21.6535" SOC, 5,000 RPM, 2.625" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Chuck on Main Collet Chuck on Sub, Parts Catcher, Bar Feed, Chip Conveyor, MoreYes
DoosanPuma-2500 LY201116550LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTBVery GoodYes Yes
DoosanPuma-2600 M201116782LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDGoodYes30.7" Swing, 24.8" Turn Dia. Chucking, 29.9", Shaft 14.8", 29.9" Turn Length, 4,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, More.Yes
DoosanPuma-2600 SY201816548LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iTDExcellentYes Yes
DoosanPuma-300 C201516628LATHES, CNC, 2-AXIS, UNIVERSALFanuc i SeriesVery GoodYesSwing 23.2", Swing Over Cross Slide 17.7", Maximum Turning Diameter 15.7", Length 26.6", 4.05" Bar Cap., 2,800 RPM, 35 HP, Programmable Tailstock, Chip Conveyor, Box Ways, More..Yes
DoosanPuma-300 LC200516602LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21iTBVery GoodYes23.2" Swing, 17.7" SOC, 15.75" Turning Dia., 52.4" Turning Length, 2,800 RPM, 4.53" Spindle Bore, 35 HP, Chip Conveyor, Tailstock, Two (2) Speed Geared Head, 12" 3-Jaw Hydraulic ChuckYes
DoosanPuma-400 B200516560LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21iTBVery GoodYesSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 2,000 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Programmable Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low Hours....Yes
DoosanPuma-400 B201316578LATHES, CNC, 2-AXIS, UNIVERSALDoosan Fanuc iVery GoodYesSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 1,500 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low Hours....Yes
DoosanPuma-400 MB200116207LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTGoodYes Yes
DoosanPuma-480 XLM201516124LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTExcellentYes Yes
DoosanPuma-600 LM201315651LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 31iTVery GoodYes21" 3-Jaw Hydraulic Chuck, 18.5" x 127.36" Travels, 4.6" Bar Cap. 60 HP, Tool Presetter, Fully Programmable Tailstock, Chip Conveyor, Hydraulic Steady Rest, More..Yes
DoosanPuma-TT-1500 SY200616675LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes
DoosanPuma-TT-2000 SY200516668LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes
HaasDS-30 SSY201116558LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlVery GoodYesSwing Over Bed 31.75", Swing Over Saddle 20.75", Maximum Turning Diameter 16", Length 18", 4,800 RPM, 30 HP, 12 Sta. Turret, Y-Axis, Sub-Spindle, Live Tooling, More..Yes
HaasHL-2199615664LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlFairYes Yes
HaasMini-Lathe200114601LATHES, CNC, GANG STYLEHaas ControlGoodYes Yes
HaasSL-10T201016521LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlExcellentYes16.25" Swing, 8" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6" 3-Jaw Chuck, Chip Conveyor, High Volume Coolant Pump, Toolsetter, More.....Yes
HaasSL-10T201116520LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlExcellentYes16.25" Swing, 8" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6" 3-Jaw Chuck, Chip Conveyor, High Volume Coolant Pump, More..Yes
HaasSL-20 TM200716490LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10", Length 20", 2" Bar Cap., 4,000 RPM, 30 HP, 12 Sta. Turret, Tailstock,Collet Chuck, Parts Catcher, Haas Servo Bar 300 Bar Feed, More..Yes
HaasSL-20 TM200516757LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10", Length 20", 2" Bar Cap., 4,000 RPM, 30 HP, 12 Sta. Turret, Tailstock,Collet Chuck, Parts Catcher, More..Yes
HaasSL-20T199916758LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYesSwing 20", Swing Over C.S. 11.2", Maximum Turning Diameter 10", Length 20", 4,000 RPM, 2" Bar Cap., 20 HP, 10 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Programmable Hydraulic Tailstock, More....Yes
HaasSL-20T199916032LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes23" Swing, 10" Turn Dia., 20" Centers, 4,000 RPM, 20 HP, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Tool Presetter, Parts Catcher, Spindle Orientation, More…Yes
HaasSL-20T200916623LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10.3", Length 20", 2.5" Bar Cap., 6,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8.3" 3-Jaw Chuck, Chip Conveyor, Tool Setter, More..Yes
HaasSL-20T200415586LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10.3", Length 20", 2.5" Bar Cap., 6,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8.3" 3-Jaw Chuck, Chip Conveyor, Tool Setter, More..Yes
HaasSL-30T200816499LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes30" Swing, 14.5" Turn Dia., 34" Centers, 3,400 RPM, 20 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, Tool Presetter, Chip Conveyor, Two Speed Gearbox, More......Yes
HaasSL-30T200216614LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes30" Swing, 14.5" Turn Dia., 34" Centers, 3,400 RPM, 30 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, Tool Presetter, Programmable Tailstock, More...…Yes
HaasSL-30T200114211LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes Yes
HaasSL-30T200816366LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes30" Swing, 14.5" Turn Dia., 34" Centers, 3,400 RPM, 30 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, Tool Presetter, Two Speed Gearbox, More......Yes
HaasSL-30TL BB200816500LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYesSwing 30", Swing Over Cross Slide 14.5", Maximum Turning Diameter 14.5", Length 60", 4" Bar Cap., 3,400 RPM, 30 HP, 12 Sta. Turret, Tailstock, 15" 3-Jaw Chuck, Chip Conveyor, More....Yes
HaasSL-30TM200616615LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing Over Bed 30", Swing Over Saddle 19", Maximum Turning Diameter 14.5", Length 34", 3,400 RPM, 30 HP, 12 Sta. Turret, 10" 3-Jaw Chuck, Programmable Tailstock, Rigid Tapping, Tool Pre-Setter, Parts CatcherYes
HaasSL-30TM BB200516759LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing Over Bed 30", Swing Over Saddle 19", Maximum Turning Diameter 14.5", Length 34", 2,400 RPM, 30 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two (2) Speed Gearbox, Rigid Tapping, High Intensity Lighting, Programmable Tailstock, USB Port, Spindle Orientation, 1 MB Program Memory, Big Bore Spindle Option, Tool Per-SetterYes
HaasSL-40T BB200113681LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes40" Swing, 25.5" Turn Dia., 51" Centers, 1,400 RPM, 40 HP, 10 Sta. Turret, 18" 3-Jaw Manual Chuck, Big Bore Option, Tool Presetter, TailstockYes
HaasSL-40TL BB200716374LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes40" Swing, 25.5" Turn Dia., 88" Centers, 1,400 RPM, 55 HP, 10 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Tool Presetter, Chip Conveyor, High Intensity Lighting, Two Speed Gearbox, Steady Rest, More…Yes
HaasST-10201516613LATHES, CNC, 2-AXIS, CHUCKERHaas ControlExcellentYes25.25" Swing, 16.25" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6.5" 3-Jaw Chuck, Tailstock, USB Port, Chip Conveyor, Tool Setter, More....Yes
HaasST-10201216622LATHES, CNC, 2-AXIS, CHUCKERHaas ControlVery GoodYes25.25" Swing, 16.25" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6.5" 3-Jaw Chuck, Chip Conveyor, Parts CatcherYes
HaasST-10T201415928LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes25.25" Swing, 16.25" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6.5" 3-Jaw Chuck, Tailstock, Chip Conveyor, More....Yes
HaasST-20 M SS201116736LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYes Yes
HaasST-20T201016594LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 15", Length 20.5", 2" Bar Cap., 4,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...Yes
HaasST-20T Y201416639LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 15", Length 21", 2" Bar Cap., 4,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...Yes
HaasST-30T201116255LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlExcellentYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 21", Length 26", 3" Bar Cap., 3,400 RPM, 30 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...Yes
HaasST-30T200916390LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 21", Length 26", 3" Bar Cap., 3,400 RPM, 30 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...Yes
HaasST-30T201015943LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 21", Length 26", 3" Bar Cap., 3,400 RPM, 30 HP, 12 Sta. Turret, Programmable Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More…Yes
HaasST-30T201315708LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes31.75" Swing, 21" Turn Dia., 26" Centers, 3,400 RPM, 30 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, High Intensity Lighting, Chip Conveyor, Tool Presetter, USB Port, Programmable Tailstock, Autoblock Programmable Steady Rest, More...Yes
HaasST-30T200916403LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 21", Length 26", 3" Bar Cap., 3,400 RPM, 30 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Tool Setter, More...Yes
HaasST-30T BB201215947LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes31.75" Swing, 21" Turn Dia., 26" Centers, 2,400 RPM, 40 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, Tool Presetter, USB Port, Programmable Tailstock, Ethernet Port, More..Yes
HaasST-30T BB201216257LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes31.75" Swing, 21" Turn Dia., 26" Centers, 2,400 RPM, 40 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, USB Port, Programmable Tailstock, More...Yes
HaasST-30T SS201116507LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 31.75", Maximum Turning Diameter 16", Length 26", 3" Bar Cap., 4,800 RPM, 30 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, MoreYes
HaasST-40 BB201314692LATHES, CNC, 2-AXIS, CHUCKERHaas ControlExcellentYes34.5" Swing, 25.5" Turn Dia., 44" Centers, 1,400 RPM, 40 HP, 12 Sta. Turret, 18" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, Big Bore Option, USB Port, Extended Tool Pocket For 33" Long Boring Bar, Rigid Tapping, Enhanced Remote Jog HandleYes
HaasST-40T201216413LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlExcellentYes40" Swing, 25.5" Turn Dia., 44" Centers, 2,400 RPM, 55 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, USB Port, Programmable Servo Tailstock, More....Yes
HaasST-40T201316380LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYes40" Swing, 25.5" Turn Dia., 44" Centers, 2,400 RPM, 55 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, USB Port, Programmable Tailstock, More....Yes
HaasST-40T201416365LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes40" Swing, 25.5" Turn Dia., 44" Centers, 2,400 RPM, 55 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, USB Port, Programmable Tailstock, More....Yes
HaasST-40T BB201316652LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes34.5" Swing, 25.5" Turn Dia., 44" Centers, 1,400 RPM, 40 HP, 12 Sta. Turret, 24" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, Big Bore Option, USB Port, Intuitive Programming System, More....Yes
HaasST-40T BB201216416LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlExcellentYes34.5" Swing, 25.5" Turn Dia., 44" Centers, 1,400 RPM, 55 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two Speed Geared Head, Chip Conveyor, Tool Presetter, Big Bore Option, USB Port, Intuitive Programming System, More....Yes
HaasTL-15200514928LATHES, CNC, 2-AXIS, W-SUB-SPINDLEHaas ControlVery GoodYes Yes
HaasTL-2201216742LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing 16", Swing Over C.S. 11.1", Maximum Turning Diameter 16", Length 48", 2,000 RPM, 12 HP, Quick Change Tool Post, Intuitive Programming System, More....Yes
HaasTL-25200616748LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlGoodYesSwing 30", Swing Over C.S. 14.7", Maximum Turning Diameter 16", Length 36", 3,400 RPM, 3" Bar Cap., 30 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes
HaasTL-3200516621LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing Over Bed 20", Swing Over Saddle 13", Maximum Turning Diameter 20", Length 60", 1,800 RPM, 30 HP, 1 Sta. Tool Post, 16" 3-Jaw Chuck, Steady Rest, More.Yes
HaasTL-3B200716620LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesSwing Over Bed 30", Swing Over Saddle 18.5", Maximum Turning Diameter 30", Length 60", 650 RPM, 30 HP, 1 Sta. Tool Post, 2- 25" Chucks, Intuitive Programming System, Rigid Tapping, Coolant System, More.Yes
HaasTL-3B200716579LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYesSwing 30", Swing Over Cross Slide 18.5", Maximum Turning Diameter 30", Length 60", 8.5" Bar Cap., 650 RPM, 30 HP, 4 Sta. Post, Tailstock, Two (2) 25" 3-Jaw Chucks, Tailstock, Two (2) Speed Geared Head, More..Yes
HaasTL-4201116119LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYes Yes
HardingeConquest T-42199416369LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18TVery GoodYes21.2" Swing, 14.5" SOC, 5,000 RPM, 1.625" Bar Cap., 10 HP, 12 Sta. Turret, 16C Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, MoreYes
HardingeElite 51 MS200815681LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes
HardingeQuest 6-42 SP200615420LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 160iTGoodYes Yes
HardingeSR-150 MSY200716764LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc i Series SRGoodYesSwing 22.44", Swing Over Cross Slide 14.6", Maximum Turning Diameter 12.15", Length 20.5", 6,000 RPM, 20 HP, 12 Station Turret, Collet Chuck On Main and Sub-Spindle, Tool Presetter, Bar Feed, More.Yes
Hitachi-SeikiSuper Hi-Cell CH-250200016707LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool HoldersYes
Hitachi-SeikiSuper Hi-Cell CH-250200116646LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 62.992", 4,000 RPM, 25 HP, 40 Sta. ATC, 10" 3-Jaw Chuck & 8" 3-Jaw Chucks, Various Tool HoldersYes
Hitachi-SeikiSuper Hi-Cell CH-250200116640LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool HoldersYes
Hitachi-SeikiTS-15199815561LATHES, CNC, 2-AXIS, UNIVERSALSeicos MultiGoodYes Yes
Hitachi-SeikiTS-15199816448LATHES, CNC, 2-AXIS, UNIVERSALSeicos MultiGoodYes22.8" Swing, 19.7" SOC, 14" Turn Dia., 19.7" Turn Length, 6,000 RPM, 1.75" Bar Cap., 15 HP, 12 Station Turret, 6" 3-Jaw Hydraulic Chuck, Tailstock, Tool Eye, Parts Catcher, Parts ConveyorYes
Hitachi-SeikiTS-15199816449LATHES, CNC, 2-AXIS, UNIVERSALSeicos MultiGoodYes22.8" Swing, 19.7" SOC, 14" Turn Dia., 19.7" Turn Length, 6,000 RPM, 1.75" Bar Cap., 15 HP, 12 Station Turret, 6" 3-Jaw Hydraulic Chuck, Tailstock, Tool EyeYes
HurcoTM-6i201316235LATHES, CNC, 2-AXIS, UNIVERSALUltramax WinMaxExcellentYes15.94" Swing, 9.45" SOC, 15.8" Centers, 6,000 RPM, 17.5 HP, 12 Station Turret, 6" 3-Jaw Chuck, Auto Tool Pre Setter, Tailstock, Chip Conveyor, More..Yes
HurcoTM-8200616392LATHES, CNC, 2-AXIS, UNIVERSALUltramax Max 32Very GoodYes21.6" Swing, 12.6" SOC, 23" Centers, 4,800 RPM, 15 HP, 12 Station Turret, 8" 3-Jaw Chuck, Constant Surface Speed, Auto Tool Pre Setter, 16C Collet Chuck, Hydraulic Tailstock, Chip Conveyor, Bar Puller, Under 1,000 Spindle Hours On MachineOn Way
HwacheonHi-Tech 450 AYLMC201216576LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYes27.56" Swing, 16.54" Turn Dia., 53.15" Turn Length, 3,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, Tailstock, More.Yes
Hyundai-KiaSKT-21 LMS200916583LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTCVery GoodYesSwing 21.7"", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Parts Catcher - Conveyor, Bar Feed Interface, More.Yes
Hyundai-KiaSKT-21L201116371LATHES, CNC, 2-AXIS, UNIVERSALFanuc OiTCVery GoodYes21.7", Swing, 13.8" SOC, 12" Turn Dia., 20.9" Turn Length, 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Station Turret, Collet Chuck, Tailstock, Chip Conveyor, Parts CatcherYes
Hyundai-KiaSKT-250 TTSY201216315LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes
Hyundai-KiaSKT-250 TTSY201016415LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes
JohnfordHT-60 C200416308LATHES, CNC, 4-AXIS, UNIVERSALFanuc 18TVery GoodYesSwing 28.7", Swing Over Cross Slide 23.6", Maximum Turning Diameter 22.1", Length 59", 5.5" Bar Cap., 1,200 RPM, 37 HP, 2 x 12 Sta. Turret, Tailstock, 24" 3-Jaw Chuck, Chip ConveyorYes
KiaSKT-21 LMS200716779LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTBGoodYes Yes
KitakoMT4-120199316776LATHES, CNC, 4-AXIS, CHUCKERFanuc OTTGoodNo Yes
Lodge and ShipleyProfiturn 40199713709LATHES, CNC, 2-AXIS, UNIVERSALFanuc 18TGoodYes Yes
MazakCybertech Turn-4500 M BB200716745LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 MT ProGoodYesSwing 33.8", Swing Over C.S. 27.5", Maximum Turning Diameter 31.9", Length 82", 1,000 RPM, 10.80" Bar Cap., 50 HP, 12 Sta. Turret, 31.5" 3-Jaw Pneumatic Chuck, C-Axis, More.Yes
MazakCybertech Turn-4500 M BB200816058LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 MTVery GoodYes Yes
MazakHyper Quadrex-150 MSY201216267LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE Very GoodYes14.3" Swing, 11.81" Turn Dia., 22.3" Centers, 5,000 RPM, 20 HP, 24 Sta. Turret, Collet Chuck, LNS Servo 80-S2 Bar Feed, Chip Conveyor, Parts Catcher, More..Yes
MazakHyper Quadrex-200 MSY201116751LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIVery GoodYes14.67" Swing, 13.54" Turn Dia., 33" Centers, 5,000 RPM, 30 HP, 2 - 12 Sta. Turrets, 10" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More.Yes
MazakIntegrex 100 III ST200416662LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProGoodYesSwing 21.46", Maximum Turning Diameter 21.46", Maximum Length 29.65", 6,000 RPM Main & Sub, 15 HP, 2" Bar Capacity, 6" 3-Jaw Hydraulic Chucks, Coolant Through Tool, Much More..Yes
MazakIntegrex 100 III SY200416663LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProGoodYes18" Swing, 18" Turn Dia., 6,000 RPM, 2" Bar Cap., Sub-Spindle, 40 ATC, Coolant Through Milling Head, Mazak Flex GL-750F Gantry, Renishaw OMP-40 Probing, Synchronous Tapping, Macros, EIA / ISO ProgrammingYes
MazakIntegrex 200 III ST200416280LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MT ProVery GoodYes Yes
MazakIntegrex 200 IV ST200816537LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes
MazakIntegrex 200 SY200016572LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MTGoodYes20.87" Swing, 19.69" Turn Dia., 30" Turn Length, 5,000 RPM, 30 HP, 40 ATC, 8" 3-Jaw Hydraulic Chuck, Coolant Through ToolYes
MazakIntegrex 300 S201216242LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixVery GoodYesSwing 33.5", Swing Over C.S. 33.5", Maximum Turning Diameter 33.5", Length 60", Y-Axis, 4,000 RPM, 40 HP, 36 Sta. Turret, Sub Spindle, Full C-Axis, 10" 3-Jaw Hydraulic Chucks, Chip Conveyor, MoreYes
MazakIntegrex E-410 H200216211LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 M ProGoodYes Yes
MazakIntegrex i-300 S201416282LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix 2Very GoodYes Yes
MazakM-5199716436LATHES, CNC, 2-AXIS, UNIVERSALMazatrol T-PlusVery GoodYes Yes
MazakPowermaster 3000N199716408LATHES, CNC, 2-AXIS, UNIVERSALMazatrol T-PlusGoodYes Yes
MazakQuick Turn Nexus-200 M200416292LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 TVery GoodYes Yes
MazakQuick Turn Nexus-200 MS200416493LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Chuck Air Blast, Parts Catcher, MoreYes
MazakQuick Turn Nexus-200 MS200416457LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-AxisYes
MazakQuick Turn Nexus-200 MS II200616459LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 25 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Parts Catchers, SMW Bar FeedYes
MazakQuick Turn Nexus-250 II200916714LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Matrix IIVery GoodYes26.5" Swing, 18.6" SOC, 14.7" Turn Cap., 26" Centers, 9.05" x 22.76" Travels, 4,000 RPM, 3.03" Bar Cap., 35 HP, 12 Sta. Turret, 10" 3-Jaw Chuck, Chip Conveyor, Conversational Programming, Programmable Tool Eye, More..Yes
MazakQuick Turn Nexus-250 II MSY200716232LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes
MazakQuick Turn Nexus-250 II MSY201116720LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIVery GoodYesSwing 28.5", Swing Over C.S. 16.04", Maximum Turning Diameter 14.78", Length 19.85", 6,000 RPM, 3" Bar Cap., 35 HP, 12 Sta. Turret, Tool Eye, Parts Catcher, More.Yes
MazakQuick Turn Nexus-250 MS200415821LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProVery GoodYes Yes
MazakQuick Turn Nexus-250 MSY201516451LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIExcellentYes26.5" Swing, 16.04" SOC, 14.75" Turn Dia., 21.27" Turn Length, 4,000 RPM, 3" Bar Cap., 35 HP, 12 Station Turret, 10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub, Bar Feed, MoreYes
MazakQuick Turn Nexus-250 MY II200916258LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYes Yes
MazakQuick Turn Nexus-300 M200716599LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 48", 3" Bar Cap., 4,000 RPM, 35 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Live Tooling, More..Yes
MazakQuick Turn Nexus-350200616712LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Fusion 640 TVery GoodYes26.77" Swing, 21" SOC, 16.5" Turn Cap., 65" Centers, 10.63" x 59.03" Travels, 3,300 RPM, 4" Bar Cap., 40 HP, 12 Sta. Turret, 12" 3-Jaw Chuck, Chip Conveyor, Conversational Programming, Programmable Tool Eye, More....Yes
MazakQuick Turn Nexus-350 II201116492LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 23.5", 4" Bar Cap., 3,300 RPM, 40 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Chip Conveyor, More..Yes
MazakQuick Turn Nexus-350 II201116492LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 23.5", 4" Bar Cap., 3,300 RPM, 40 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Chip Conveyor, More..Yes
MazakQuick Turn Nexus-350 M II200816491LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 60", 4" Bar Cap., 3,300 RPM, 40 HP, 12 Sta. Turret, Tailstock, 15" 3-Jaw Chuck, Chip Conveyor, SMW Steady Rest, More..Yes
MazakQuick Turn Nexus-400 II200716704LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixGoodYes33.6" Swing, 24.2" Swing OCS, Max. Dia. 22.8", 83.46" Max. Length, 2,500 RPM, 4.63" Bar Cap., 50 HP, 12 Station Turret, 13.3" X-Travel, 83.46" Z-Travel, 12" 3-Jaw Hydraulic Chuck, Tool Pre-Setter, RS-232 Interface, Chip Conveyor, More...Yes
MazakQuick Turn Nexus-400 II201216461LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYes33.6" Swing, 24.2" Swing OCS, Max. Dia. 22.8", 83.46" Max. Length, 2,500 RPM, 4.63" Bar Cap., 50 HP, 12 Station Turret, 13.3" X-Travel, 83.46" Z-Travel, 12" 3-Jaw Hydraulic Chuck, Tool Pre-Setter, RS-232 Interface, Chip Conveyor, More...Yes
MazakQuick Turn Nexus-400 II200816379LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYes33.6" Swing, 24.2" Swing OCS, Max. Dia. 22.8", 59.06" Max. Length, 2,500 RPM, 4.63" Bar Cap., 40 HP, 12 Station Turret, 13.38" X-Travel, 62" Z-Travel, 12" 3-Jaw Hydraulic Chuck, Tool Pre-Setter, RS-232 Interface, Chip Conveyor, More…Yes
MazakQuick Turn Nexus-450 II200616715LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYes33.268" Swing, 24.2" SOC, 22.835" Turn Cap., 84" Centers, 13.375" x 83.46 Travels, 2,000 RPM, 5.5" Bar Cap., 50 HP, 12 Sta. Turret, 20" 3-Jaw Chuck, Chip Conveyor, Conversational Programming, Tool Eye, More..Yes
MazakQuick Turn Nexus-450 II200616715LATHES, CNC, 2-AXIS, UNIVERSALMazatrol MatrixVery GoodYes33.268" Swing, 24.2" SOC, 22.835" Turn Cap., 84" Centers, 13.375" x 83.46 Travels, 2,000 RPM, 5.5" Bar Cap., 50 HP, 12 Sta. Turret, 20" 3-Jaw Chuck, Chip Conveyor, Conversational Programming, Tool Eye, More..Yes
MazakQuick Turn Nexus-450 M II201216619LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing Over Bed 33.268", Swing Over Saddle 24.2", Maximum Turning Diameter 22.835", Length 82.64", 2,000 RPM, 50 HP, 12 Sta. Turret, 18.11" 3-Jaw Pneumatic Chuck, Programmable Tailstock, Rigid Tapping, Tool Pre-Setter, More.Yes
MazakQuick Turn Smart-350 M200516357LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol SmartVery GoodYesSwing 28.35", Swing Over Cross Slide 19", Maximum Turning Diameter 16.5", Length 48.72", 4" Bar Cap., 4,00 RPM, 40 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Chip Conveyor, Live Tooling, More..Yes
MazakQuick Turn-250199916342LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Fusion 640 TGoodYes23.65 Swing, 10.5" SOC, 15.70 Turn Dia., 19.68" Turn Length, 5,000 RPM, 2.75" Bore, 20 HP, 12 Station Turret, 8" 3-Jaw Hydraulic Chuck, Tailstock, Tool Eye, Conversational Programming, Chip ConveyorYes
MazakQuick Turn-300200016325LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Fusion 640 TFairYes23.64" Swing, 41" Centers, 3,300 RPM, 30 HP, 16 Station Turret, 2.5" Bar Cap., Tailstock, 10" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool EyeYes
MazakQuick Turn-300200016291LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Fusion 640 TGoodYes23.64" Swing, 26" Centers, 3,300 RPM, 30 HP, 16 Station Turret, Tailstock, 10" 3-Jaw Hydraulic Chuck, Tailstock, Chip Conveyor, Tool Eye, EIA / ISO, Graphic Display, More…Yes
MazakSlant Turn Nexus-550201416765LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Matrix Nexus IIVery GoodYes Yes
MazakSlant Turn-60 U - 3000201116581LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Matrix IIVery GoodYes36.02" Swing, 27" SOC, 500 RPM, 14.5" Bar Cap., 60 HP, 10 Sta. Turret, New 26” 4-Jaw Manual Chuck Front, New Pneumatic 3-Jaw Chuck Rear, Chip Conveyor, MoreYes
MazakSuper Quick Turn-18MS Mark II199616460LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol T-PLUSGoodYes Yes
MazakSuper Quick Turn-200 MSY200116018LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes
MazakSuper Quick Turn-200 MSY200316087LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes
MiyanoBNE-34S3200516367LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBExcellentYes15" Swing, 13" SOC, 5,000 RPM, 1.34" Bar Cap., 10 HP, 12 Sta. Turret, Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, Bar Feed, MoreYes
Mori-SeikiCL-200B199815645LATHES, CNC, 2-AXIS, CHUCKERMSC-803LVery GoodYesSwing Over Bed 20.3", Swing Over Saddle 9.5", Maximum Turning Diameter 16.14", Length 14.6", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, 8" 3-Jaw Chuck, Chip ConveyorYes
Mori-SeikiDL-150199816514LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMitsubishi MSC-518L (18iTT)Very GoodYes11.02" Swing, 7.8" Turn Dia., 5,000 RPM, 10 HP, 2-12 Sta. Turret, Collet Chuck on Main and 6" 3-Jaw Hydraulic on Sub-Spindles, Tool-Eye Ready, Chip Conveyor, More..Yes
Mori-SeikiDL-20199715039LATHES, CNC, OPPOSING SPINDLESFanuc 16TGoodYes Yes
Mori-SeikiDL-20 MC199714239LATHES, CNC, OPPOSING SPINDLESFanuc 16TGoodNo Yes
Mori-SeikiMT-2000 SZ200116512LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-501TA (Fanuc 18iT)Very GoodYes29.52" Swing, 21.6" Turn Dia., 50.47" Centers, 4,500 RPM, 40 HP, 40 ATC, 12 Sta. Turret, Collet Chucks, LNS Bar Feed, High Pressure Coolant, More..Yes
Mori-SeikiMT-2000 SZ200316683LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-501TA (Fanuc 18iT)GoodYesSwing 29.52", Swing Over C.S. 23.62", Maximum Turning Diameter 21.6", Length 40.15", 4,500 RPM, 2.5" Bar Cap., 20 HP, 12 Sta. Turret, 40 Sta. ATC, Coolant Through Spindle, More.Yes
Mori-SeikiMT-2500 SZ200516600LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-501 (Fanuc 18iM)Very GoodYesSwing 35.8", Swing Over Cross Slide 23.62", Maximum Turning Diameter 21.1", Length 60.19", 2.99" Bar Cap., 4,500 RPM, 25 HP, 60 Sta. ATC, Chip Conveyor, Live Tooling, More..Yes
Mori-SeikiNL-2000 SMC200616690LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIGoodYes Yes
Mori-SeikiNL-2000 SY - 500200716689LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIGoodYesSwing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes
Mori-SeikiNL-2000 SY - 500200516524LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery Good Swing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes
Mori-SeikiNL-2000 Y200416698LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIGoodYes Yes
Mori-SeikiNL-2500 MC - 1250200616746LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 51", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes
Mori-SeikiNL-2500 MC - 1250200616746LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 51", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes
Mori-SeikiNL-2500 MC - 700200516261LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 29", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes
Mori-SeikiNL-3000 - 1250200816650LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSX-850 IIIVery GoodYes39.2" Swing, 16.5" Turn Dia., 49.6" Centers, 3,000 RPM, 30 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, Servo Driven Tailstock, Chip Conveyor, Tool Presetter, Servo Driven Turret, More....Yes
Mori-SeikiNL-3000 - 2000200713962LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSX-850 IIIVery GoodYes Yes
Mori-SeikiNL-3000 Y - 1250200816717LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIVery GoodYesSwing 39.17", Swing Over C.S. 32.48", Maximum Turning Diameter 16.9", Length 49.6", 3,000 RPM, 3.5" Bar Cap., 30 HP, 12 Sta. Turret, Touch Setter, 15" 3-Jaw Hydraulic Chuck, Bar Feed, More.Yes
Mori-SeikiNL-3000 Y - 2000200816141LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYes Yes
Mori-SeikiNL-3000 Y - 2000200816141LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYes Yes
Mori-SeikiNLX-2500 SY - 700201116744LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, High Pressure Coolant, Transformer, More.Yes
Mori-SeikiNT-1000 SZM201016754LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-701 IVGoodYes14.5" Swing, 14.5" Turn Dia., 21" Centers, 6,000 RPM, 15 HP, 1-40 ATC + 1 - 10 Sta. Turrets, 8" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More.Yes
Mori-SeikiNT-3200 DCG - 1000 SZ200616513LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-711 (Fanuc 31iT)Very GoodYes23.6" Swing, 23.6" Turn Dia., 49.4" Centers, 5,000 RPM, 20 HP, 40 ATC, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chucks, Tool Life Management System, High Pressure Coolant, More..Yes
Mori-SeikiSL-154 SY200216586LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-805Very GoodYesSwing / Swing Over Cross Slide - 26.8" / 20.1", Maximum Turning Diameter / Length - 11.8" / 13.7", 6,000 RPM Main & Sub, 10 HP, 1.77" Bar Capacity, Collet Chuck on Main and Sub-Spindles, Bar Feed Interface, Bar Feed, Auto Parts Catcher, More..Yes
Mori-SeikiSL-3H198416000LATHES, CNC, 2-AXIS, UNIVERSALYasnac LX-2GoodYes22.4" Swing, 9.4" Turn Dia., 24" Centers, 4,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck, Chip Conveyor, Hydraulic TailstockYes
Mori-SeikiSL-400 B - 2000200016601LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSC-501GoodYes36" Swing, 29" SOC, 25" Turning Dia., 79" Turning Length, 2,400 RPM, 4.5" Spindle Bore, 40 HP, Chip Conveyor, Tailstock, Two (2) Speed Geared Head, 15" 3-Jaw Hydraulic ChuckYes
Mori-SeikiSL-403 CMC201516306LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 32iBExcellentYes Yes
Mori-SeikiSL-403 CMC200816735LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-501 IIIVery GoodYes Yes
Mori-SeikiSL-45C199716638LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSC-516 (Fanuc 16T)GoodYesSwing 26.4", Swing Over Cross Slide 18.1", Maximum Turning Diameter 19.3", Length 39.2", 6" Bar Cap., 1,010 RPM, 40 HP, Tailstock, Chip Conveyor, Box Ways, More..Yes
Mori-SeikiSL-600 BMC - 1000200015729LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSC-501 (Fanuc 21)GoodNo Yes
Mori-SeikiSL-600 CMC199816774LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSC-501 (Fanuc 21)GoodYes39.1" Swing, 36.6" Turning Diameter, 700 RPM, 10.3" Bar Cap., 19.09" x 43.3" Travels, 24" 3-Jaw Pneumatic SMW Chucks Front and Rear, Chip Conveyor, Twenty Foot (20') Bar Stand, MoreYes
Mori-SeikiSL-65A199816510LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSC-516 (Fanuc 16M)GoodYes35" Swing, 25.6" Turn Dia., 36" Centers, 1,800 RPM, 50 HP, 12 Sta. Turret, 15" 3-Jaw Pneumatic Chuck, Programmable Tailstock, More..Yes
Mori-SeikiSL-6A198216264LATHES, CNC, 2-AXIS, UNIVERSALFanuc 6TBVery GoodYes35" Swing, 25.6" Turn Dia., 36" Centers, 1,800 RPM, 50 HP, 12 Sta. Turret, 15" 3-Jaw Pneumatic Chuck, Programmable Tailstock, More..Yes
Mori-SeikiSL-75 B199815810LATHES, CNC, 2-AXIS, UNIVERSALFanuc 16TVery GoodYes Yes
Mori-SeikiSL-80B199015573LATHES, CNC, 2-AXIS, CHUCKERFanuc 15TAGoodYes Yes
Mori-SeikiSL-8F198413502LATHES, CNC, 2-AXIS, CHUCKERFanuc 21TVery GoodYes Yes
Mori-SeikiTL-40 MC - 3000198816605LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 6TBFairYes24" Swing, 14.9" SOC, 17.3" Turning Dia., 114.4" Turning Length, 2,000 RPM, 3.6" Bar Cap., 30 HP, Chip Conveyor, One (1) Steady Rest, Milling, Chip Conveyor, MoreYes
Mori-SeikiZL-253B SMC200316187LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMitsubishi MSC-501 (18iTA)GoodYesSwing 26.77", Swing Over C.S. 20.08", Maximum Turning Diameter 15.35", Length 16.22", 3,500 RPM, 2.97" Bar Cap., 25 HP, 12 & 8 Sta. Turret, Live Tool Holder, Tool Presetter, More.Yes
Mori-SeikiZL-25A - 500198816183LATHES, CNC, 4-AXIS, UNIVERSALFanuc MF-D6Needs RepairYesSwing 20.47" , Swing Over C.S. 13.78", Maximum Turning Diameter 10.24", Length 20.87", 3,500 RPM, 2.8" Bar Cap., 25 HP, 10 & 8 Sta. Turret, Parts Catcher, More.Yes
Nakamura-TomeSC-300199816508LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21TBGoodYesSwing 22.05", Swing Over Cross Slide 13.78", Maximum Turning Diameter 13.6", Length 31.91", 2.8" Bar Cap., 3,500 RPM, 30 HP, 12 Sta. Turret, Tailstock, 18" 6-Jaw Chuck, MoreYes
Nakamura-TomeSlant-4199816642LATHES, CNC, 2-AXIS, UNIVERSALFanuc 15TVery GoodYesSwing 31.1", Swing Over Cross Slide 18.9", Maximum Turning Diameter 15.75", Length 35.8", 2.56" Bar Cap., 3,500 RPM, 25 HP, Tailstock, Chip Conveyor, Box Ways, More..Yes
Nakamura-TomeSuper NJTX200816284LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31i AExcellentYes Yes
Nakamura-TomeTW-20200016769LATHES, CNC, 4-AXIS, W-SUB-SPINDLEFanuc 18TGoodYesSwing 10.63", Swing Over C.S. 10.63", Maximum Turning Diameter 7.56", Length 7.87", 5,000 RPM, 2" Bar Cap., 20 HP,2 - 12 Sta. Turret, USB Port, More.Yes
Nakamura-TomeTW-20MMY200316703LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes
Nakamura-TomeWT-100200316716LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 16iTBGoodYesSwing 18.9", Swing Over C.S. 12.2", Maximum Turning Diameter 12.2", Length 29", Y-Axis 2", 6,000 RPM, 20 HP, 3 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Iemca Bar Feed, More..Yes
Nakamura-TomeWT-100201616272LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 9.6", Swing Over C.S. 7.6", Maximum Turning Diameter 6.89", Length 19.8", Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Gantry Loader, More..Yes
Nakamura-TomeWT-150 MMY200515918LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYesSwing 10", Swing Over C.S. 7.48", Maximum Turning Diameter 7.48", Length 19.803", Y-Axis, 5,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle and Sub Spindle, Parts Catcher, Chip ConveyorYes
Nakamura-TomeWT-300 MMY200516643LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, Gantry Load, More....Yes
Nakamura-TomeWT-300 MMY200512637LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, More....Yes
Nakamura-TomeWY-100 II201816709LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 11.2"", Swing Over C.S. 9.6", Maximum Turning Diameter 7.48", Length 19.8", 2.44" Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, ATS Collet Chuck Main and Sub Spindle, Chip Conveyor, More..Yes
Nakamura-TomeWY-250 L201316565LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 11.2", Swing Over C.S. 9.84", Maximum Turning Diameter 8.9", Length 35.8", Y-Axis, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chucks Both Spindles, Chip Conveyor, Much More.Yes
Okuma2SP-150H200616693LATHES, CNC, 2-AXIS, CHUCKEROSP-P200LVery GoodYesSwing 13.7", Swing Over C.S. 9.5", Maximum Turning Diameter 8.66", Length 5.91", 4,500 RPM, 15 HP, 2 - 12 Sta. Turrets, Two (2) - Gantry Loaders With Stacker Tables, More…Yes
Okuma2SP-150H201216694LATHES, CNC, 2-AXIS, CHUCKEROSP-P200LVery GoodYesSwing 13.7", Swing Over C.S. 9.5", Maximum Turning Diameter 8.66", Length 5.91", 4,500 RPM, 15 HP, 2 - 12 Sta. Turrets, Two (2) - Gantry Loaders With Stacker Tables, More…Yes
OkumaCaptain L-370 M200516531LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-E100LGoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Live ToolingYes
OkumaCaptain L-370 MW BB200315923LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Sub-Spindle, LNS Bar Feed, Two (2) Live Holders, Loaded With Options - Low HoursYes
OkumaCaptain L-370 W BB200415377LATHES, CNC, 2-AXIS, W-SUB-SPINDLEOSP-E100LGoodYesSwing Over Bed 20.86", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 19.68", 3,800 RPM, 30 HP, 12 Sta. Turret, Sub-Spindle, Automatic Parts Catcher, Barfeed Interface, More...Yes
OkumaESL-8200516191LATHES, CNC, 2-AXIS, UNIVERSALOSP-U10LVery GoodYes17.72" Swing, 13.78" SOC, 4,200 RPM, 2 Bar Cap., 15 HP, 8 Sta. Turret, 8" 3-Jaw Chuck, Toolsetter, User Task II, Parts Catcher, More.....Yes
OkumaGenos L-200 EM201416340LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-P200LARVery GoodYes Yes
OkumaGenos L-300 MYW201416706LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300L-RVery GoodYes20.47" Swing, 11.81" Turn Dia., 17.72" Turn Length, 3,800 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck and 6" on Sub Spindle, Parts Catcher, Coolant Through, Loaded With OptionsYes
OkumaLB-300 M200016561LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-U100LGoodYes Yes
OkumaLB-3000 EX II MY201316705LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-P300LVery GoodYes Yes
OkumaLB-3000 EX II MYW201316697LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300LVery GoodYesSwing 22.38", Swing Over C.S. 18.5", Maximum Turning Diameter 13.39", Length 39.76", 5,000 RPM, 3.18" Bar Cap., 40 HP, 12 Sta. Turret, High Pressure Coolant, More.Yes
OkumaLB-3000 EX MYW201716667LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-U200LExcellentYes Yes
OkumaLB-45 II - 1000201516351LATHES, CNC, 2-AXIS, UNIVERSALOSP-P300LVery GoodYes Yes
OkumaLT-200 MY200516629LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P100LGoodYesSwing 15.75", Swing Over Cross Slide 12.2", Maximum Turning Diameter 8.27", Length 21.26", 2" Bar Cap., 4,500 RPM, 15 HP, Barfeed Interface, Chip Conveyor, Parts Catcher, Live Tooling, More..Yes
OkumaLT-200 MY200916349LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYes Yes
OkumaLT-300 M200516691LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P100LGoodYesSwing 21.65", Swing Over C.S. 18.9", Maximum Turning Diameter 13.78", Length 35", 3,800 RPM, 3" Bar Cap., 30 HP, 2-12 Sta. Turret, More.Yes
OkumaLT-3000 EX 2TMY BB201616518LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P300LExcellentYesSwing Over Bed 21.65", Swing Over Cross Slide 16.3", Maximum Turning Diameter 13.78", Length 33.3", 4,200 RPM, 30 HP, 16 + 16 Sta. Turrets, 12.4" 3-Jaw Chuck Main, 10" 3-Jaw Sub, Tool Pre-Setter, More..Yes
OkumaLU-15 M Impact199714480LATHES, CNC, 4-AXIS, W-MILLINGOSP-7000LGoodYes Yes
OkumaLU-15 MW BB199714472LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-7000LGoodYes20.87" Swing, 14.7" Turn Dia., 3,800 RPM, 30 HP, 12 + 8 Sta. Turret, 10" 3-Jaw Hydraulic Chuck Main, Sub-Spindle, Parts Catcher, One (1) Live Tool Holder, Big Bore Option, IGF, Bar Feed Interface, More..Yes
OkumaLU-300 2SC 1000200616504LATHES, CNC, 4-AXIS, UNIVERSALOSP-P200LGoodYes Yes
OkumaLU-3000 EX201316532LATHES, CNC, 4-AXIS, UNIVERSALOSP-P300LLike NewYesSwing Over Bed 22.84", Swing Over Cross Slide 18.5", Maximum Turning Diameter 16.5", Length 23.62", 5,000 RPM, 30 HP, 12 + 8 Sta. Turrets, 8" 3-Jaw Chuck, Tailstock, Rigid Tapping, Tool Pre-Setter, Parts Catcher, More..Yes
OkumaLU-3000 EX 2SW201416656LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEOSP-P300LExcellentYesSwing Over Bed 22.84", Swing Over Cross Slide 18.5", Maximum Turning Diameter 16.5", Length 23.81", 5,000 RPM, 30 HP, 12 + 8 Sta. Turrets, 8" 3-Jaw Chuck, Sub-Spindle, Rigid Tapping, Tool Pre-Setter, Parts Catcher, More..Yes
OkumaLU-300M200816688LATHES, CNC, 4-AXIS, UNIVERSALOSP-P200LVery GoodYes Yes
PinnaclePK-L210C201916647LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDNewYesSwing 20.47", Swing Over Cross Slide 14.17", Maximum Turning Diameter 17.3", Length 24", 3.03" Bar Cap., 3,500 RPM, 25 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Servo Turret, Two (2) Year WarrantyYes
SamsungSL-25 ASY201016739LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYesSwing 25.59", Swing Over C.S. 21.26", Maximum Turning Diameter 14.17", Length 18.70", 6,000 RPM, 2.6" Bar Cap., 20 HP, 12 Sta. Turret, Tool Eye, More.Yes
VDFU1270S1980/201313713LATHES, CNC, 2-AXIS, UNIVERSALFagor 8055RebuiltYes Yes
Warner and Swasey2SC-25 M4500199113975LATHES, CNC, 4-AXIS, CHUCKERGE 1050Very GoodYes Yes
Yama SeikiGS-460200616456LATHES, CNC, 2-AXIS, CHUCKERFanuc OiTGoodYes Yes
YCMGT-200A200815966LATHES, CNC, 2-AXIS, UNIVERSALFanuc TXP-100eVery GoodYes Yes